Pro Staff Blog

Scorpion Venom Review by Rudy Hassall

If you are like me are beyond the issues with wax on your strings and cables, then I have found the product for you.

To be honest waxing the strings and cables on my bows was a necessary evil. I like the benefits of keeping them from drying out, starting fray and keep if from soaking up the water in the rain. But, the trade-off is that it allows everything else that is bad for the strings to stick to it and act as sandpaper each-n-every draw and shot of the bow.

Scorpion Venom Archery produces several products that will fit your needs. I have listed the products that they offer below and underlined the products that I use:

•    Anti-Venom Bowstring Cleaner: If you already have applied one of the other inferior waxes on your strings, you will need a bottle of this to clean the string before applying the other products

•    Biscuit Spray: Odor-free pump spray for your Whisker Biscuit, waterproofing, reduces friction

•    Cam and Serving Lube: An odor-free lubricant for the cam pins and string serving that makes contact with the cam during draw and release cycles. Will not attract dirt or freeze

•    Crossbow Rail Lube: An odor-free lube, reduces friction and increases string life

•    Polymetric Bowstring Fluid: An odor-free fluid that won’t freeze or attract dirt and will last longer than wax

•    Target Arrow Release Fluid: An odor-free lubricant to allow easier arrow removal from your 3-D targets

•    3 Star String Maintenance Kit: Contains the Anti-Venom String Cleaner, Cam & Serving Lube & Polymeric Bowstring Fluid

I will warn you in that if you are going to have to clean the wax off of your existing strings and cables with the Anti-Venom, it will take several, not a couple sessions to remove all the wax. Now, I am sure this will vary as to what type of wax and how often it was applied. I used a very soft, natural based wax so the wax in my strings and cables infused deeply.

It is a fairly simple process to clean your strings and cables. You apply it with its built-in sponge applicator and wipe of with a towel in one fluid direction. Repeat this until no residue is left on your towel when wiping.  Then, let I let it dry out for at least one hour. Then, you can apply the Polymetric Bowstring Fluid and let it dry overnight. I then applied a second coat to ensure it was coated fully.  It dries to a light sheen!

I have been using this system now for a little over 3 yrs now. I have been very pleased with the products that I have used. I have installed this on several bows and have hunted in all kinds of weather, I can say that my strings and cables not fraying and look almost as good as new!

You can get all the information from their website and even find a local dealer.

20100503_SorpionVenomProducts2010

Kevin Paulson

Kevin Paulson is the Founder and CEO of HuntingLife.com. His passion for Hunting began at the age of 5 hunting alongside of his father. Kevin has followed his dreams through outfitting, conservation work, videography and hunting trips around the world.

Related Articles

Back to top button